Klark Teknik DM8000 User Manual Download Page 38

Page: 38 / 65

DM8000 User Manual

3.10.4 Logic Meter
Logic Meter

modules allow you to monitor the strength of Logic commands.

Logic Meter Module Icons

Logic Meter Component Objects

Right-click to access the Component Object’s Dialog Box, with the

following controls:

Logic Meter Dialog Box

•

Indicator Node

to the left lights when the logic control input terminal

receives a HIGH control signal.

•

Meter Label

lets you create a custom label for the given logic channel.

3.11 Generators

Generators

component objects provide sine-wave, sweep, pink-noise, and

white-noise generator functions. Generators may be connected to any audio

input terminal for diagnostic and setup purposes, or for applications that require

tones or to mask other sounds.

3.11.1 Tone Generator
Tone Generator

modules can generate a single tone at a set frequency, or they

can be used to sweep from a low frequency to a high frequency. These tones

can be useful for finding and dealing with problem frequencies in a room or

sound system.

Tone Generator Module Icon

Tone Generator Component Object

Right-click to access the Component Object’s Dialog Box, with the

following controls:

Tone Generator Dialog Box

•

Tone

mode generates a single frequency. Tone mode disables the Start

Frequency, Stop Frequency, Sweep Interval and Time Interval parameters.

•

Sweep

mode generates a tone that sweeps through a programmed range of

frequencies. In Sweep mode, the Frequency parameter is disabled.

•

Mute

turns the Tone Generator module on or off. The module is muted when

the node is lit green.

•

Level

controls the Tone Generator output level.

•

Frequency

sets the single frequency used in Tone mode.

•

Start Frequency

and

Stop Frequency

sets the frequency range for

Sweep mode.

•

Sweep Interval

selects the bandwidth for the Sweep tone.

•

Time Interval

sets how long each tone is held during a frequency sweep.

3.11.2 Pink noise Generator
Pink Noise Generator

produces pink noise (equal energy at all octaves), which

can be useful as a reference for diagnostics and setting consistent levels by ear.

Pink Noise Generator Module Icon

Pink Noise Generator Component Object

Summary of Contents for DM8000


































































Search results

Summary of Contents for DM8000

Reviews:

Related manuals for DM8000

Brands by name

Popular brands

Klark Teknik DM8000, User Manual

Search results

Summary of Contents for DM8000

Reviews:

Related manuals for DM8000

Brands by name

Popular brands