Klark Teknik DM8000 User Manual Download Page 3

Page: 3 / 65

DM8000 User Manual

1. Installation

1.1 System requirements

Minimum Hardware

PC-based Hardware

-Core 2 DUO CPU

-Ethernet port

-1 GB RAM

Recommended Operating Systems

Windows*

-Windows 7, 32-bit of 64-bit

-Windows 8, 32-bit or 64 bit

* Windows is either a registered trademark or trademark of Microsoft Corporation in the United States
and/or other countries.

A PC computer running DM8000 DSP Designer Software with Windows®

operating systems must have a 10/100 BaseT network card (NIC) installed.
Ethernet switches must be 10/100 BaseT compatible, with sufficient ports for

connection to each DM8000 unit (multiple switches may be used).

For more information about DM8000 networking see

“

Networking

”

on pgs. 38-39.

1.2 Installation Procedure

To install the DM8000 DSP Designer software:
1. Go to the DM8000 product page at

http://www.music-group.com/brand/klarkteknik.

2. Click on the Downloads tab.
3. Click on the download icon for the latest version of the DM8000 DSP

Designer software.

4.  Read the software End User License Agreement and click on “Agree”.
5.  Click on “Download”.
6.  Click on the downloaded .exe fi le and follow the installation instructions.

2. Software Interface Overview

2.1 Basic Screen elements

The DM8000 DSP Designer software deploys an interface structure similar to

software geared toward visual design, with standard pulldown menus, toolbars

and libraries.

2.1.1 Main Screen

Here is the

Main Screen

you should see when you open and load the software:

DM8000 Main Screen

The main screen of the DM8000 software has several sections:

2.1.2 Build window

The

Build Window

occupies the largest portion of the main screen, at

the lower-right. This is the area where system design actually occurs,

with the placement and connection of Component Objects.

DM8000 Build Window

Summary of Contents for DM8000


































































Search results

Summary of Contents for DM8000

Reviews:

Related manuals for DM8000

Brands by name

Popular brands

Klark Teknik DM8000, User Manual

Search results

Summary of Contents for DM8000

Reviews:

Related manuals for DM8000

Brands by name

Popular brands