KKT KOLBE IH5900RL, User Manual

Page: 80 / 84

80
Installation
9.5 Connecting the hob to the mains
• Make sure, that the data on the rating plate (V) matche your
supply voltage.
• The connection to the power supply must be carried out by a
qualified electrician in accordance with the relevant standard
or with a single-pole circuit breaker, as described below:
• The electrical connection must be made properly and
in accordance with the applicable safety regulations.
• To connect the hob to the mains power supply, do not use adapters,
reducers, or branching devices, as they can cause overheating and
fire.
• The cable must not be kinked or pinched.
• The power supply cable must not touch any hot parts and must be
positioned so that its temperature will not exceed 75˚C at any point.
• The cable must be checked regularly.
• If the cable is damaged or needs to be replaced, this must be done by
a qualified electrician with the correct tools .
• The mains cable supplied must be used for installation.
It may only be replaced by one of the same type.
!
After installation, the connection cable and the
underside of the hob must no longer be accessible.
blue
brown
black
yellow / green
blue
brown
black
yellow / green