79
EN
Installation
Fixing the hob using the mounting brackets
• Place the hob on a stable, smooth surface
(For example, use the packaging as a base).
• Make sure that no pressure is exerted on the elements
protruding from the hob.
• Screw 4 mounting brackets to the underside of the hob
as shown in the figure:
• Select the position of the brackets according to
the worktop thickness.
• Make sure that the brackets do not touch the inner surfaces
of the worktop.
9.4 Inserting the hob
!
Note:
On the outside of the hob there are ventilation openings.
When inserting the hob, make absolutely sure that they are not
blocked by the worktop.
min.50mm
max.5mm
max.5mm
Installation of heat protection below the hob
If the hob is installed above a drawer, furniture compartment
or similar, or if the hob is accessible from below:
• Install a protective plate of heat-resistant material
(e.g. made of perforated plate to ensure ventilation)
at a minimum distance of at least 50 mm below the hob
(see illustration).
• When using adhesive, make sure that the temperature
resistance is 150°C.
Figure
may vary
A:
Hob
B:
Worktop
C:
Mounting bracket
A
A
C
C
B
B
A
B
C
C
B
A
Summary of Contents for IH5900RL
Page 42: ......
Page 43: ...User Manual for your induction hob EN Modell IH5900RL B Version 1 4 220630...
Page 83: ......
