Kingsman MCVST42LP, Installation Instructions Manual

Page: 14 / 84

MCVST42 Facing Requirements
Required Non-Combustible Areas
Any materials covering the face of the fireplace must be non-combustible (i.e. brick stone, tile, concrete board).
Safety Screens require 1-3/16” space on top of fireplace opening and 1” on sides and bottom to allow for installation & removal.
This area can have
a combustible
surface (i.e. hearth)
Note: Do not drive
excessively long
screws into the
face of the unit as
internal parts may
be damaged.
-OPTIONAL-
IF COVERING FIREPLACE
FACE with concrete board
Recommended Coverage is
44
” x 52-3/4” Screwed to
Framing.
-OPTIONAL-
Recessed
Combustible Wall is
allowed above
framing header
See Basic
Finishing 1-6
also
Combustible
Mantel Line
Any materials covering the
face of the fireplace MUST
be non-combustible (i.e.
brick stone, tile, concrete
board).
Metal Non-
Combustible Header
Strip (3-
1/2” x 42”)
Supplied for the
application of a Non-
Combustible fireplace
covering (i.e. brick
stone, tile, concrete
board, etc.).
Can be Removed
and replaced by
concrete board.
THIS SECTION
MUST BE NON
COMBUSTIBLE
This area can have
a combustible
surface (i.e. drywall)
51-
3/8”
14