Kingfisher KI 2300 Series Operation And Maintenance Manual Download Page 8

Page: 8 / 74

SERVICE AND SUPPORT

KI2000 UM-6

6 -

Applications Support

Please visit

www.kingfisherfiber.com

to see our comprehensive

Application Notes

written to support instrument users, an updated

version of this manual or instrument firmware updates. FAQs can be

found in the “Support” section of our website.

This equipment can perform testing in accordance with TIA and IEC

fiber optic test standards. Please refer to

www.kingfisherfiber.com

for

details.

Look at

www.kingfisherfiber.com

to find distributor and service centre

details from the

Contact Us

section.

Our local agents are able to offer excellent applications advice in your
language and time zone.

Otherwise if you are having difficulties, please feel free to contact
[email protected] for applications support.

Instrument Service

Qualified personnel must perform adjustment, maintenance or repair
of this product. To obtain service, please contact your local Kingfisher
International distributor or our office in Australia:

Tel: (+61) 3-9757-4100
Fax: (+61) 3-9757-4193

Email: [email protected]

If returning equipment to us for service or calibration, please download
and complete the

Return Material Authorization Form

located on

the

Support

page on our web site.

To avoid delays and minimise disruption for our customers, we offer a
fixed price repair service.

For the staff at our fully equipped service and calibration centre, it is
their pleasure to keep your equipment performing at its very best.

Summary of Contents for KI 2300 Series











































































Search results

Summary of Contents for KI 2300 Series

Reviews:

Related manuals for KI 2300 Series

Brands by name

Popular brands

Kingfisher KI 2300 Series, Operation And Maintenance Manual

Search results

Summary of Contents for KI 2300 Series

Reviews:

Related manuals for KI 2300 Series

Brands by name

Popular brands