35
5
VENT setting key
in driver zone
－
VENT outlet is closed and not
changed.
Inlet air mode in driver zone could be changed by pressing the
key, inlet air mode indicates on display screen. After inlet air
mode in driver zone was adjusted by manual style, automatic
mode in driver zone will void and change into manual mode.
When the mode of defrosting/dehumidification opened, inlet
air mode in driver zone will not be adjusted by manual style
because the air inlet is opened in defrosting mode.
6
Defrosting
/dehumidification
setting key
－
－
Enter into dehumidification mode by pressing the key(less
than 2 Sec.); and enter into defrosting mode by pressing the
key (more than 2 Sec.), thus could turn off defrosting &
dehumidification mode by pressing the key(less than 2 Sec.).
The defrosting & dehumidification mode run no more than
15min at most and keep on running according to automatic
mode after 15min. When pressing A/C power switch-key in
driver zone (more than 2 Sec.), directly could close defrosting
/dehumidification mode.
The defrosting and dehumidification state indicate their own
different icons on display screen respectively.
7
VENT mode setting
key
－
Modified VENT mode in turn
by pressing key.
VENT mode location indicate
on display screen.
Modified VENT mode in turn by pressing key, VENT mode
location indicate on display screen. If the air inlet feedback
signal is not given, will not choose to blow for person or front
windshield location. When the defrosting mode is activated,
air flow will be distributed to front windshield location.
8
LCD screen
－
When the lighting lamps in vehicle are turned on, open LCD backlight and press any key, as a
rule, LCD screen will open and indicate for 10 Sec.
9
A/C on/off key in
passenger zone
－
Indicate “OFF” on display
screen. Turn on heating
function in passenger zone by
pressing key(more than 2 sec),
without cooling function. The
A/C will turn off when presses
the key(more than 2Sec.) once
more.
Turn on the A/C in passenger zone and make it run in
automatic mode by pressing key(more than 2Sec.), it’s running
will be in accordance with parameters set by A/C system
software. (such as blower speed and interior/exterior
circulation in passenger zone, etc.). Turn off directly
defrosting/dehumidification mode if they are working when
pressing down on/off key in passenger zone (more than 2Sec.),
in the time, the A/C in passenger zone is also closed.
10
TEMP adjust rotary
knob in passenger
zone
－
－
Increase setting temperature at rotating clockwise and
decrease setting temperature at rotating anti-clockwise. If the
A/C temperature in passenger zone set in scope of 17-27
centigrade, once temperature is less than 17centigrade, then
set “LO” corresponding to maximum cooling power; once
temperature is more than 27centigrade, then set “HI”
corresponding to maximum heating power. If A/C in driver
zone lies in activity mode,meanwhile, the A/C in passenger
zone modified from wakening to activity mode, thus the
