20 of 56
Revision 4
KiloVault
®
LLC • 330 Codman Hill Road, Boxborough, MA 01719 • +1 (888) 218-5924 •
• www.kilovault.com
59 in (1.5 m) HAB™ V4 HAB™ V4 CAN Bus cable.
1 each
59 in (1.5 m) RJ485 HAB™ V4 to inverter Modbus cable.
1 each
RJ45 120 Ω Resistor Plug
1 each
Wall Mounting Plate
1 each
M8*30 Expanding Screw
10 each
M8*16 mm Bolt
2 each
PG21 (1.1 in, 28 mm) Strain Relief
1 each
PG42 (2.1 in, 28mm) Strain Relief
1 each
Solid Vent Replacement Plates
4 each
4.3.
Tools, Materials, and Safety Equipment Required
for Installation
•
Personal protective equipment, including but not limited to, safety
glasses, insulated gloves, and protective footwear
•
Lift equipment capable of lifting and supporting at least at least 230 lb
(105 kg)
•
Drill and drill bit for drilling pilot holes for the mounting plate
•
If you will be mounting onto concrete or masonry, you will need a 12
mm drill bit for the included M8*30 expansion screws
•
Conduit and conduit fittings (depending upon local electrical
requirements)
•
Various sized Phillips and flathead screwdrivers
•
Torque wrench and sockets
•
1/0
battery to inverter cables
•
Battery combiner box (when more than one KiloVault® HAB™ V4
batteries are being used)
•
Level
•
Pencil or marker
4.4.
Suitable Installation Locations