42 of 56
Revision 4
KiloVault
®
LLC • 330 Codman Hill Road, Boxborough, MA 01719 • +1 (888) 218-5924 •
• www.kilovault.com
inverter and the battery will start the inverter, please start with step #2
and save this step for last.
2.
Turn on (close) the battery breaker on the side of the KiloVault® HAB™
V4.
3.
Press the power button on the control panel at least three seconds.
The green RUN LED will flash five times, and then both the KiloVault®
HAB™ V4 control panel LCD screen and the state of charge light bar
will light up.
4.
Wait five seconds for the KiloVault® HAB™ V4 battery management
system to pre-charge.
5.
If you are installing and commissioning more than one KiloVault®
HAB™ V4, after you have made the electrical and communication
connections and set the KiloVault® HAB™ V4 addresses, perform steps
2 - 4 for each KiloVault® HAB™ V4, starting with the first follower
KiloVault® HAB™ V4, until all KiloVault® HAB™ V4 units are energized.
6.
Turn on the inverter.
If there are no alarms, the green
RUN
LED will be lit, and the control panel will
be populated with information about the running condition of your KiloVault®
HAB™ V4. The control panel will remain lit for 5 minutes and then go blank. If
you briefly (less than three seconds) press the KiloVault® HAB™ V4 unit’s power
button, the control panel will again light for 5 minutes.
If there is an alarm condition, the
RED
Alarm LED will light, plus one or more of
the alarm or protection state indicators at the right of the control panel will
light. Please see the BMS Alarm and Protection table for details.
To turn off the KiloVault® HAB™ V4, press the power button for three seconds.
The run LED will flash five times, then the control panel and the state of charge
bar will go dark. The KiloVault® HAB™ V4 is now off.
5.5.
Monitoring
You can monitor the KiloVault® HAB™ V4 using either the front control panel or
the “KiloVault® KiloVault® HAB™ V4 iT” mobile application. There are both
Android and iOS versions of the app. The iOS app requires iOS 10 or above. The
Android app requires Android 5.0 (Lollypop) and above. The apps are available
from the iOS App Store or the Google Play Store. Please see the KiloVault®
website to download detailed KiloVault® HAB™ V4 iT instructions.
