4-4 Operation Method
RC04-PCR-LA
Frequency setting function
To enter the frequency setting mode on the Remote Controller, press
the F1 (FRQ) key in the Home Position. (On the PCR-LA AC power
supply, press the F key.)
Limit value setting function
To enter the voltage, frequency, or current limit value setting mode on
the Remote Controller, press the LIMIT (SHIFT, 1) key in the Home
Position status to enter the limit value display mode, and then press
the F5 (Vmax/Vmin), F1 (Fmax/Fmin), or F3 (Imax) key. (On the
PCR-LA AC power supply, press the LIMIT (SHIFT, 1) key to enter
the limit value display mode, then press the V, F, or I key.)
This function is valid only in AC or DC mode.
Voltage display mode change
To switch the voltage display mode on the Remote Controller, press
the Vrms/Vpk/Vset/Vave (SHIFT, F5) key. (On the PCR-LA AC
power supply, press the (SHIFT, V) keys.)
Current display mode change
To switch the current display mode on the Remote Controller, press
the Irms/Ip/Iph/WATT/Iave (SHIFT, F3) key. (On the PCR-LA AC
power supply, press the (SHIFT, I) keys.)
The PCR-LA AC power supply control panel has no “Iph” display
mode. This function is added by the Remote Controller. For details,
see “4.3.4 Peak Holding Current Measurement Mode”.
4.3
Functions Extended by Using the
Remote Controller
The Remote Controller extends some of the PCR-LA AC power sup-
ply functions. This section describes the extended functions and how
to use them.
4.3.1 AC + DC Mode
The PCR-LA AC power supplies allow three output voltage modes,
AC, AC-S and DC. Use of the Remote Controller allows an additional
output voltage mode, AC + DC mode. The AC + DC mode is a func-
tion that superimposes DC voltage on AC voltage or vice versa.
Summary of Contents for RC04-PCR-LA
Page 10: ...1 4 General RC04 PCR LA...
Page 100: ...A 22 Appendix RC04 PCR LA...
