Kikusui RC04-PCR-LA, Operation Manual

Page: 36 / 102

4-16 Operation Method RC04-PCR-LA
Power Line Abnormality Simulation Operating Procedure
• Preset the steady status voltage and frequency.
1. Press the ESC key to call the Home Position.
2. Set OUTPUT to OFF.
3. Set the output voltage mode to AC using the AC/DC (SHIFT,
8), and then press the ENTER key.
4. Press the SIM key.
The PCR-LA power supply will enter the key-lock mode automat-
ically.
This causes the
fi rst display to appear as shown below.
5. Press the F1, F3, or F5 function key to move the cursor to
the desired item.
6. Set a value using the numeric keys or JOG/SHUTTLE
For setting using the numeric keys, press the ENTER key to con-
fi rm the value.
Select the desired magni fi cation for item T1 to T5 and N using
keys as shown below.
Keying operation is valid with respect to the selected item.
Table 4-6 Magni fi cations and Keys for Switching
Item Magni fi cation Key operation
T1 x1 ms/x1 deg T1 (SHIFT, F1)
T2 x1/x10 T2 (SHIFT, F3)
T3 x1/x10 T3 (SHIFT, F5)
T4 x1/x10 T4 (SHIFT, F1)
T5 x1/x10 T5 (SHIFT, F3)
N x1/x10/x100 T5 (SHIFT, F3)
(First display)
0 d e g 0 m s 0 . 0 m s
T 1 T 2 T 3
F1 F2 F3 F4 F5
(First display)
0 d e g 0 m s 0 . 0 m s
T 1 T 2 T 3
F1 F2 F3 F4 F5