RC04-PCR-LA
Operation Method 4-9
Memory Read Procedure
Select the same output voltage mode (AC, DC, or AC + DC) as used
for setting of the memory.
To read data set in each address (“ADRS”), take the following steps.
1. Press the ESC key to call the Home Position.
2. Press the MEM key to display the memory content.
3. Press the numeric keys or use JOG/SHUTTLE to enter a
memory address.
This will cause the set values stored in the entered memory
address to be read out. The set values to be read differ depending
on the output voltage mode. For more information, see Table 4-3.
To display waveform bank and DC voltage set in the same
address, press the MENU key.
4. To con
fi
rm the read set values, press the ENTER key. To
cancel them, press the ESC key.
Pressing the ESC key allows you to exit the memory content-indi-
cating display. Press the ENTER key to con
fi
rm the set values,
then press the ESC key to end the memory read operation.
(Example of Initial Setup Status)
1
5 0 . 0 0 H z
0 . 0 V
A D R S
F R Q
V r m s
(First display)
2
1 0 0 . 0 H z
1 0 0 V
A D R S
F R Q
V r m s
(Example of the display showing that FRQ = 100 Hz and Vrms = 100 V
are set in ADRS2)
(First display)
(Example of the display showing that waveform bank W00 and DC v0 V
are set in ADRS2)
2
W 0 0
+ 0 . 0 V
A D R S
WA V E
V d c
(Second display)
Summary of Contents for RC04-PCR-LA
Page 10: ...1 4 General RC04 PCR LA...
Page 100: ...A 22 Appendix RC04 PCR LA...
