5-4 Parts Names and Functions
RC04-PCR-LA
[8] CLR key
Cancels the set value and recalls the previous value.
ALMCLR (SHIFT, CLR) key
Clears the alarm status in the event of an alarm.
[9] MEM key
Calls voltage (and frequency) value (or values) from the memory.
Pressing the MEM key and then selecting a memory address using
the numeric keys or JOG/SHUTTLE will call the address and the
voltage (and frequency) value (or values) stored in that address on
the LCD.
Press the ENTER key to set the value retrieved in the output mode.
M-EDIT (SHIFT, MEM) key
Stores the set value in the memory.
Set the setting you wish to store and the relevant address, then press
ENTER. This will store the value (or values) in the memory.
[10]SEQ key
Selects the sequence execution mode.
To start the sequence, press the SEQ key. Then, press the F4 (END)
key to set the end address, the F3 (STRT) key to set start address,
and the F5 (LOOP) key to set the sequence repetition count. Finally,
press the F1 (RUN) key to start the sequence.
S-EDIT (SHIFT, SEQ) key
Selects the sequence setting mode.
In the sequence setting mode, press the MENU key to change the
setting display select the desired item using the F1 to F5 key and set
the sequence data.
[11]SIM key
Selects the power line abnormality simulation mode.
In the power line abnormality simulation mode, press the MENU
key to switch to the setting display, then select the desired item
using the F1 to F5 key for data setting.
CUR HMNC (SHIFT, SEQ) key
Selects the harmonic current analysis mode.
In the harmonic current analysis mode, press the F1 (ALL/ODD/
Summary of Contents for RC04-PCR-LA
Page 10: ...1 4 General RC04 PCR LA...
Page 100: ...A 22 Appendix RC04 PCR LA...
