4-30 Operation Method
RC04-PCR-LA
• When the set number of repetitions has been executed, the
sequence ends and the display changes to the sequence execution
mode display.
• To set OUTPUT OFF when the sequence has been executed
the set number of times, set OUTPUT OFF as the end
address.
• Stopping a sequence by pressing the OUTPUT key is by
internally activates F1 (STOP) and then sets OUTPUT to
OFF. Therefore, OUTPUT is not set to OFF until after the
step being executed when the OUTPUT key was pressed has
been output for several hundred ms.
Fig.4-13
Lagged OUTPUT OFF
NOTE
Several hundred ms
Output OFF
Summary of Contents for RC04-PCR-LA
Page 10: ...1 4 General RC04 PCR LA...
Page 100: ...A 22 Appendix RC04 PCR LA...
