Kikusui PCR-M Series Communication Interface Manual Download | Manualshive

Page: 61 / 166

background image

Tutorial

Output-on Phase Control (SEQuence 2: SYNChronize,

PCR-M only)

On the PCR-LE, use the output subsystem commands to control the output ON/OFF phase.

Do not use sequences.
PCR-M/PCR-LE has five different trigger subsystems -TRANsient, SYNChronize, ACQuire,

SIMulation, and PROGram. These features are mapped to SEQuence1 to SEQuence5

respectively, as the SCPI specification generally categorizes each trigger subsystem as a

numbered Trigger Sequence.
The SEQuence2 (SYNChronize) group is the output ON phase control trigger subsystem.
Using TRIGger:SEQuence2 (or TRIGger:SYNChronize) subsystem allows you to synchronize

the output ON/OFF changes with a specific AC output phase angle.

TRIGger:SEQuence2:SOURce PHASe

'Configures the PCR so that the phase will

be controlled when the output is turned on

TRIGger:SEQuence2:PHASe 270

'Sets the phase angle at 270 deg

'Turns the output on

When the power supply output is changed from OFF to ON state, the changing action is

synchronized to the specified phase angle.
To disable the output-on phase control, set the trigger source to IMMediate.

TRIGger:SEQuence2:SOURce IMMediate

The output-on phase control is applied only when the output is changed from OFF to ON. It

is not applied when the output changes from ON to OFF or when other settings such as the

AC voltage setting, DC voltage setting, and frequency setting change.
The output-on phase control is not a function that synchronizes the output frequency to the

input commercial AC line.
The sequence 2 group does not have INITiate commands. It is always initiated and cannot

be aborted.

Introduction
Installing the VISA library
Interface Setup
Overview of Command
Parameters
Default settings

Command (function

search)

IEEE488.2 Common Commands
Output Setting
Protection and Clearing Alarms
Triggered Control of Output
Output On/Off Phase Control
Measured Value Queries
System Configuration
Registers

Command (ABC search)

Command (Sub-system

search)

SOURce
OUTPut
MEASure and FETCh
TRIGger
SYSTem
STATus
IEEE488.2 Common Commands
Other Commands
List(PDF)

Register

Architecture
Register structure

Appendix

A List of Errors
Processing time of main

Tutorial

Programming AC Output
Programming DC Output
Triggering Output Change
Output-on Phase Control
Measurement
Waiting for Operation Complete
Panel display
Status Monitoring
Error Checking
Visual Basic 2008

AC Power Supply PCR-M series

Communication Interface Manual

PCR-M series Communication Interface Manual

KIKUSUI ELECTRONICS CORP.

61/166

«
...
59
60
61
62
63
...
»

Summary of Contents for PCR-M Series







































































































































































Reviews:

No comments

Related manuals for PCR-M Series

Brand: Dake Pages: 24

Brand: Fein Pages: 133

Brand: OCZ Pages: 8

Brand: ZALMAN Pages: 4

Brand: Altronix Pages: 4

EnergyGrind-100

Brand: PEUGEOT Pages: 10

BOMAG BPR 50/55 D

Brand: Fayat Pages: 112

XTC ARGB Series

Brand: COUGAR Pages: 2

PullzAll 885002

Brand: Warn Industries Pages: 49

X-Finity Series

Brand: Ultra Products Pages: 1

Brand: MESTA Pages: 26

Brand: probst Pages: 28

Brand: American DJ Pages: 2

Clincher Fence Machine

Brand: JoinTech Pages: 25

Brand: General International Pages: 52

Brand: POWER ON BOARD Pages: 7

Brand: Allen-Bradley Pages: 2

Brand: Bavaria Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands