Kikusui PCR-M Series Communication Interface Manual Download

Page: 1 / 166

Introduction

The PCR-M series Communication Interface Manual explains the settings and commands for

remotely controlling the PCR series using the communication interface.

•

RS232C interface (standard equipped)

•

GPIB interface (optional)

•

USB interface (optional)

When the PCR-M series is operating under remote control, the REMOTE LED on the display

on the front panel lights. To switch from remote mode to local mode (panel operation) from

the panel, press LOCAL.

Reading environment

This manual is in HTML format and PDF format. The manual can be viewed by the following

environment.

：

Windows 7 or later

Browser: Microsoft Internet Explorer 9.0 or later
PDF Reader: Adobe Reader 9.2 or later

Related manuals

For the safety precautions, installation, operation, and specifications of the PCR, read the

accompanying PCR-M series User's Manual.

Intended readers

This manual is written for readers with sufficient basic knowledge of how to control

instruments using a personal computer.
Familiarize yourself with the

syntax of the SCPI commands

that are used with the product

before you use them.

Structure of the manual

This manual consists of the following sections.

・

Overview

・

Setup

・

Overview of messages

・

Command (list*1)

・

Appendix

・

Tutorial

*1. The list of command is provided in a PDF file.

Trademarks

Microsoft, Windows NT and Windows are registered trademarks of Microsoft Corporation in

the United States and/or other countries.
All other company names and product names used in this manual are trademarks or

registered trademarks of the respective company.

Firmware version of the product to which this manual

applies

This manual applies to products with the following firmware version:

Ver.1.3x

Instrument Interface Standards

The PCR conforms to the following standards.

Introduction
Installing the VISA library
Interface Setup
Overview of Command
Parameters
Default settings

Command (function

search)

IEEE488.2 Common Commands
Output Setting
Protection and Clearing Alarms
Triggered Control of Output
Output On/Off Phase Control
Measured Value Queries
System Configuration
Registers

Command (ABC search)

Command (Sub-system

search)

SOURce
OUTPut
MEASure and FETCh
TRIGger
SYSTem
STATus
IEEE488.2 Common Commands
Other Commands
List(PDF)

Architecture
Register structure

Appendix

A List of Errors
Processing time of main

commands
FAQ

Tutorial

Programming AC Output
Programming DC Output
Triggering Output Change
Output-on Phase Control
Measurement
Waiting for Operation Complete
Panel display
Status Monitoring
Error Checking
Visual Basic 2008

AC Power Supply PCR-M series

Communication Interface Manual

<< MANUAL TOP

PCR-M series Communication Interface Manual

KIKUSUI ELECTRONICS CORP.

1/166

Summary of Contents for PCR-M Series







































































































































































Search results

Summary of Contents for PCR-M Series

Reviews:

Related manuals for PCR-M Series

Brands by name

Popular brands

Kikusui PCR-M Series, Communication Interface Manual

Search results

Summary of Contents for PCR-M Series

Reviews:

Related manuals for PCR-M Series

Brands by name

Popular brands