Kikusui KDS6-0.2TR, Operation Manual

Page: 50 / 60

46 Remote Control KDS6-0.2TR
— To the present users of the existing KIKUSUI Model SPEC40080 —
The KDS6-0.2TR supports the following device messages used by the existing
KIKUSUI Model SPEC40080. Present users of the SPEC40080 can operate The
KDS6-0.2TR without modifying the program.
VSET<n>
Sets the voltage value of Channel n, or inquires about the present setting. “n”
should be specified in the range from 1 to 3.
Program message
• Syntax
Command message:
VSET<n> <Setting value>
Query message:
VSET<n>?
• Program data
(Example) To set the voltage value of Channel 1 to 3.1234 V:
VSET1 3.1234
Response message
In response to
VSET<n>?
(n = 1 to 3), the present setting is returned as
fixed decimal point data (0.0000 to 6.5000).
(Example)
3.1234
IOUT<n>?
Inquires about the output current value of Channel n. “n” should be specified in
the range from 1 to 3.
Program message
• Syntax
Query message:
IOUT<n>?
Response message
• Response data
In response to
IOUT<n>?
(n = 1 to 3), the present output current value is
returned as a real number. If OCP has occurred, CH<n>OCP (n = 1 to 3) is
returned, “n” indicating the channel in which OCP took place. To clear
OCP, the
OUTP 0 command is sent.
(Example 1)
200.000
(Example 2) CH1 OCP
Setting of voltage value for Channel n (n = 1 to 3)
Minimum value 0.0000
Maximum value 6.5000
Resolution 0.0001
Data format Fixed decimal point
Initial value 0.0000
Unit V
Output current reading resolutions for Channel n (n = 1 to 3)
Resolution Normal mode 0.001 (CH1 200-mA range)
0.0001 (CH1 10-mA range/CH2, 3)
High-speed mode 0.01 (CH1 200-mA range)
0.001 (CH1 10-mA range/CH2, 3)
Unit mA