Kikusui KDS6-0.2TR, Operation Manual

Page: 15 / 60

KDS6-0.2TR Prior to Use 11
■
Do not place on an inclined surface or in a location subject to
vibration.
The KDS6-0.2TR could fall over, leading to malfunction or personal injury.
■
Do not operate the KDS6-0.2TR in a location subject to intense
magnetic or electric fields.
An intense magnetic or electric field could cause erroneous operation, resulting in
electric shock or fire. Moreover, such placement is likely to impair measurement or
lead to similar problems.
■
Do not operate the KDS6-0.2TR near high-sensitivity measur-
ing instruments or receivers.
Noise produced by the KDS6-0.2TR may affect other devices.
1.3 Precautions in Transportation
If the KDS6-0.2TR is moved to a new location or otherwise transported, please
observe the following:
■
Turn off the power switch located on the rear panel.
Moving the KDS6-0.2TR with the power turned on could result in electric shock or
malfunction.
■
Remove all connected wiring.
Moving the KDS6-0.2TR with connected cables could result in internal wire break-
age or cause the device to fall, leading to personal injury.
■
When transporting the KDS6-0.2TR, always pack it using dedi-
cated packing materials.
Failure to use the dedicated packing materials may result in malfunction of the
KDS6-0.2TR due to vibration or fall during transportation. If you require packing
material, please inquire at your Kikusui distributor/agent.
■
When relocating the KDS6-0.2TR, make sure that it is accom-
panied by this operation manual.