44 Remote Control
KDS6-0.2TR
ACHSel
Each time a voltage setting message or current read-out message is sent, selection is
made as to whether or not the panel indication should be switched to the specified
channel. This function is useful when you wish to execute the setting or read-out
process as rapidly as possible.
Program message
•
Syntax
Command message:
ACHSel <{1|0}>
ACHS <{1|0}>
Query message:
ACHSel?
ACHS?
•
Program data
(Example) To perform the setting that will not allow switchover:
ACHSel 0
Response message
In response to
ACHS?
, the present setting is returned as an integer (1 or 0).
(Example) When panel indication switchover is on:
1
When panel indication switchover is off:
0
Setting of panel indication switchover
Data format
Integer
1: (To be switched)
0: (Not to be switched)
Initial value
1 (To be switched)
* The setting is reset to 1 when the power is turned off.
Summary of Contents for KDS6-0.2TR
