2
WireWorks
®
Panel System
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Required Tools for Assembly
The following tools are required
to assemble panels:
• Dead blow mallet (soft rubber
mallet filled with shock absorbing
material such as sand or lead
shot)
•
3
/
8
” large, flat blade screwdriver
•
3
/
16
” allen wrench
•
9
/
16
” open end wrench
• #3 Phillips head screwdriver
• Diagonal pliers
• Utility knife
Summary of Contents for WireWorks
Page 1: ...Assembly Instructions WireWorks Panel System January 2020...
Page 2: ...A...
Page 46: ...44...
Page 47: ...45...