WireWorks
®
Panel System
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
21
Installing Base Trim at
Intersections
When base trim is snapped into
place at 90° and T-intersections,
the upper tabs engage slots in the
half post and the lower tabs snap
over the lip on the half post glide
housing (Figure 30).
Hint:
Open the base raceway
door to make it easier to engage
the upper tabs into the slots of
the half post.
Note:
The glide housing at
the bottom of the vertical posts
must be oriented such that the
recessed cut out is positioned
under the slots
(Detail G).
Summary of Contents for WireWorks
Page 1: ...Assembly Instructions WireWorks Panel System January 2020...
Page 2: ...A...
Page 46: ...44...
Page 47: ...45...