14
WireWorks
®
Panel System
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Installing Tile Hooks
Tile hooks are used to lock the
horizontal rail in place relative
to the vertical post and provide
a mounting location for the tiles.
Four hooks need to be installed
for every acoustical and raceway
tile.
Note:
Be sure the frame has been
correctly installed and aligned.
1. Insert tile hooks through the
cutout in the end of the horizontal
and into the cutout in the vertical
with the top of the hook pointing
to the left (rounded side of hook
faces up). Push the end of each
hook through the cut-out, then
rotate the hook one-quarter turn
to the right so the top of the hook
is pointing upward (Figure 14).
Hint:
If the tile hook does not
turn properly, the horizontal has
not been installed properly. Check
to be sure the horizontal rivets are
fully seated into the vertical post
and that none of the rivets are
outside of the embosses. When
all of the hooks are properly
installed, there should be four
hooks for each tile you are going
to hang on the panel.
Note:
On segmented tiled panels,
hooks are inserted in the cut-outs
in the verticals just above the
intermediate horizontals as well
as through the cut-outs in the
horizontal rails. See the diagram
on the right.
Leveling
1. After building the first corner,
level the panel frames by turning
the post glides the appropriate
direction with a
9
/
16
” open end
wrench (Figure 15).
Note:
Glides can be adjusted by
hand or by using a
9
/
16
” open end
wrench.
2. Continue building panels in this
manner described in
Attaching
Horizontals To Verticals
on page 8 until the frames are
complete, leveling each panel as
it is constructed.
Summary of Contents for WireWorks
Page 1: ...Assembly Instructions WireWorks Panel System January 2020...
Page 2: ...A...
Page 46: ...44...
Page 47: ...45...