KTS816C-
WM
PAGE 1 OF 2
STOP
DON’T RETURN TO STORE!
COURTYARD CREATIONS INC.
Step 2:
At the rear of the seat/back assembly (#1), fasten the seat and
the back by using bolts (#4) and washers (#7). Keep the
bolts loose. See Figure 2.
Note:
The bolts on the seat/back assembly (#1) should be
loose before assembling the chair. See Figure 1.
Step 1:
Open the seat/back assembly (#1) and place it onto a
non-abrasive surface, such as a carpet. See Figure 1.
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
#4 BOLT M6*16
16
7
4
8
1
FIGURE 2
FIGURE 1
HEX.KEY WRENCH 4MM
HEX.KEY WRENCH 6MM
BOLT CAP M6
BOLT CAP M6
BOLT CAP
WASHER d6.5*D13*1.0
BOLT M6*14
BOLT M6*16
BOLT M6*35
RIGHT LEG
LEFT LEG
SEAT/BACK ASSEMBLY
17KAA0201----Y4
17KAA0101----Y4
18000337002
18000337006
18000337004
17C33A0712001Y4
17FA05040301-Y4
17C02A0755131Y4
17C33A0706001Y4
KTS816C-CS02
KTS816C-CS03
KTS816C-CS01
1
1
2
2
8
6
11
12
10
9
7
8
2
2
4
1
1
1
6
5
4
3
2
1
Q’TY
MATERIAL CODE
PART
PART
NO.
MATERIAL CODE
PART
Q’TY
PARTS LIST
PART
NO.
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children. Children
should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
!
!
!
!
!
