ergoCentric
®
ergocentric.com
USER GUIDE
Keep your chair free from dust and dirt. Clean the upholstered parts with damp or
dry cloth. Do not remove any covers or try to open the seat mechanism. If technical
maintenance is needed, or if the gas lift needs to be replaced or repaired – ccontact
your dealer or ergoCentric directly. Make sure that you have chosen the right casters
for the floor surface where you intend to use the chair (casters with rigid wheels for
carpeted floors, casters with resilient tyred wheels for hard floor covering).
The chair has been tested with appropriate casters so that the unloaded chair
will not roll unintentionally. All five casters must be of the same type.
COMPONENT
MATERIAL
RESOURCES
MATERIAL
RECYCLING
ENERGY
RECOVERY
Seat mechanism
Steel
ü
Footbase
Aluminum
ü
Seat foam
PUR foam
ü
Seat and back shell
Plastics
ü
Seat
Textile
ü
Back stem
Aluminium
ü
Packaging
Cardboard
ü
Casters, lift
Misc.
ü
ü
The chair can be dismantled without use of special equipment.
Plastic components heavier than 50g are labelled for easy sorting and recycling.
HÅG
Capisco
™
HAG Capisco
™
, HAG StepUp
®
, HAG Capisco Puls
™
and HAG in Balance
®
are all registered trademarks of Flokk.
ergoCentric Seating Systems is a proud distributor of Flokk products.
