Parameter
Description
Time
Current time (hours:minutes) in 24-hour clock format.
Date
Today's date.
Time zone
Time zone where the chassis is located.
Task 7: Creating a Device Under Test Profile
This section describes how to create a DUT profile. A DUT profile defines the connection settings for the
device under test, such as the device’s connection type, connection parameters, link type, and global
commands. The BreakingPoint device uses these settings to connect to the device under test for
remote scripting. For more information on DUT Profiles, see the DUT Profiles section in the user guide.
Note:
The BreakingPoint device provides a default DUT profile called BreakingPoint Default.
This DUT profile cannot be modified or deleted, however, it can be cloned and customized for
your device.
To create a DUT profile, do the following:
1. Click
Control Center
>
Device Under Test
from the BreakingPoint Control Center menu bar.
2. Select a profile from the
Profile Name
list to clone.
3. Click
Clone the selected DUT
.
4. Type a name for the DUT profile in the
Name
field and click
OK
.
Chapter 3 Getting Started
– 17 –
