Task 5
Creating user accounts.
Task 6
Setting the time and date.
Task 7
Creating a DUT Profile.
Task 8
Creating a Network Neighborhood.
Task 9
Making Port Reservations.
Task 10
Creating a test.
Task 1: Installing the BreakingPoint Device
This section describes how to set up the BreakingPoint device.
To set up the BreakingPoint device, do the following:
1. Secure the chassis into an equipment rack.
Note:
The chassis must be close enough to the device under test so that you can connect
cables from the appliance to the device under test.
2. Insert the computer controller into the module over the power tray.
3. Insert the blade(s) into the top two modules.
4. Power the computer.
5. Connect the device under test to the BreakingPoint device.
Task 2: Configuring the BreakingPoint Device
You will need to use either a telnet client or text console to configure the network settings for the
BreakingPoint device. The following sections provide instructions for configuration through a telnet
client or a text console.
Chapter 3 Getting Started
– 10 –
