Keysight Infiniium 8000 Series, Service Manual

Page: 103 / 162

Chapter 6: Replacing Assemblies
To remove and replace the CD-ROM drive
103
6
Using a Torx T6 driver, remove the three screws securing the CD- ROM to the
support bracket.
When re- assembling, torque the three Torx T6 screws to 1.5 in- lb.
7
Using a Torx T10 driver, remove the two screws securing the CD- ROM adapter
board to the support bracket.
When re- assembling, torque the two Torx T6 screws to 1.5 in- lb.
Figure 6-7
Removing the support bracket and adapter board
8
To replace the CD- ROM drive, reverse the above procedure.
Torx
10
Torx
T6
Torx
T6
Support
bracket
Adapter
board
CD-ROM
drive
Torx
T6