Keysight Technologies U3022AM42, User'S And Service Manual

Page: 73 / 90

The control code <addrs>.<data> entries value noted in the following Test
Instructions table will be used to configure the RF switches for this testing.
After making your entry , select <OK> to execute the command . To return
back for further entries, select Interface Control on the PNA display.
Table 1 6 RF Signal Path Insertion Loss (S21)
RF Path Description Signal Insertion Loss (typical)
Source IN to Ports 3-1 4 Source Figure 5 4 on page 75
Source IN to Ports 15-18 Source Figure 5 5 on page 75
RCVR OUT to Ports 5-24 Receiver Figure 5 6 on page 77
RCVR OUT to Ports 5-18 Receiver Figure 5 7 on page 77
U3022AM42 Troubleshooting the Test Set
Source IN to CPLR THRU Source Figure 5 8 on page 78
RCVR OUT to CPLR ARM Receiver Figure 5 8 on page 78
Ext. Source IN to Ports 3-14 Source Figure 59 on page 80
Ext. Source IN to CPLR THRU Source Figure 6 0 on page 80
Ext. Source OUT to Source IN Source Figure 6 1 on page 80
Keysight U3022AM42 User's and Service Guide 73