2 Review Safety Requirements
S9106AC-2IF, -4UP, and -42D 5G FR1 Multi-port Transceiver Solutions, Startup Guide
7
2. 5 Cleaning
Clean the outside of Keysight products with a soft, lint-free, slightly dampened cloth.
Do not use detergent or chemical solvents.
To prevent electrical shock, disconnect from Mains before
cleaning.
Use a dry cloth or one slightly dampened with water to clean the
external case parts. Do not attempt to clean internally.
Cleaning connectors with isopropyl alcohol shall only be done
with the instruments power cord removed and in a well-ventilated
area. Allow all residual alcohol moisture to evaporate and the
fumes to dissipate prior to energizing the instrument.
Keep isopropyl alcohol away from heat, sparks, and flame. Store
in a tightly closed container. The isopropyl alcohol shall not be
stored, or left open, in the area of the equipment. Use isopropyl
alcohol with adequate ventilation to prevent the combustion of
fumes or vapors.
Avoid contact with eyes, skin, and clothing, as isopropyl alcohol
causes skin irritation, may cause eye damage, and is harmful if
swallowed or inhaled. It may be harmful if absorbed through the
skin. Wash thoroughly after handling. In case of spill, soak up with
sand or earth. Flush spill area with water. Dispose of isopropyl
alcohol in accordance with all applicable federal, state, and local
environmental regulations.
In case of fire, use alcohol foam, dry chemical, or carbon dioxide;
water may be ineffective.
Summary of Contents for S9106AC-2IF
Page 6: ...2 S9106AC 2IF 4UP and 42D 5G FR1 Multi port Transceiver Solutions Startup Guide ...
Page 24: ...20 S9106AC 2IF 4UP and 42D 5G FR1 Multi port Transceiver Solutions Startup Guide ...
Page 42: ...38 S9106AC 2IF 4UP and 42D 5G FR1 Multi port Transceiver Solutions Startup Guide ...
Page 56: ...52 S9106AC 2IF 4UP and 42D 5G FR1 Multi port Transceiver Solutions Startup Guide ...
