Keysight Technologies S9106AC-2IF Startup Manual Download Page 68

Page: 68 / 80

6 Verify Operation

The Modular TRX interface can be started as follows:

Select the

Start

menu (lower-left corner icon)

> Scroll down to "

" applications

> Select the

Keysight Modular Transceiver

drop-down arrow

> Scroll down the list and select

LaunchModularTRX

Each Mode looks different and has its own collection
of measurement capabilities, controls, windows, and SCPI commands.

Each Mode runs within a screen (there can be multiple screens).

Screens are shown as tabs across the top of the interface.
IQ Analyzer Mode is included with the S9106AC-4UP
and appears as a tab with the label IQ Analyzer 1.

3. Select the IQ Analyzer 1 drop-down selector.

4. Set the Mode / Measurement / View for IQ Analyzer 1:

a. Select Mode as IQ Analyzer (Basic).

b. Select Measurement as Complex Spectrum.

c. Select View as Normal.

d. Select OK.

S9106AC-2IF, -4UP, and -42D 5G FR1 Multi-port Transceiver Solutions, Startup Guide

Summary of Contents for S9106AC-2IF

















































































Search results

Summary of Contents for S9106AC-2IF

Reviews:

Related manuals for S9106AC-2IF

Brands by name

Popular brands

Keysight Technologies S9106AC-2IF, Startup Manual

Search results

Summary of Contents for S9106AC-2IF

Reviews:

Related manuals for S9106AC-2IF

Brands by name

Popular brands