Step 5: Verify Operation of the M9381A and M9393A
Software Installation
Self Test Failure
If the Self Test does not pass for any of the instruments, the test indicates which
module is likely to need service. However, you should return all modules and all
cables for that particular instrument.
To ensure that you send in the group of modules that was reported in a Self Test
failure, go to Utilities > Calibration Options... to view this screen:
The string pointed out in this image is the Cal ID. The first 10 characters represent the
Unique ID and the remaining characters show the modules (and their serial numbers)
that constitute the M9381A or M9393A instrument. A Certificate of Calibration for that
instrument contains the same information. Additionally, you may see this same
information from the SFP by using Help > About.
36
Keysight Y1299A-004 RF PA/FEM Reference Solution Startup Guide
