Keysight Technologies RF PA/FEM, Startup Manual

Page: 30 / 48

Step 3: Install the Software
Software Installation
Software Installation
Install the software in the order indicated in the following table into the embedded
controller, or PC if your solution contains an M9021A PXIe Cable Interface.
Restart your controller when prompted by the respective software installer.
If you are using a remote controller, use this sequence to restart
the PC and chassis:
1) Shut down the PC. 2) Power down the chassis. 3) Power up the
chassis. 4) Power up the PC.
Order Software
1 * Keysight IO Libraries Suite version
16.3 Update or newer; includes
Keysight Connection Expert www.keysight.com/find/iosuite
2 * M9018A 18 Slot PXIe Chassis
Drivers www.keysight.com/find/M9018A.
www.keysight.com/find/m9018a-driver
3 M9393A PXIe Vector Signal Analyzer
(version 1.0 or newer) www.keysight.com/find/M9393A-driver
4 M9381A PXIe Vector Signal
Generator version 1.4.400.0 or
newer) www.keysight.com/find/M9381A
www.keysight.com/find/m9381a-driver
5 N7624B Signal Studio for LTE/LTE-
Advanced FDD (optional) www.keysight.com/find/M7624B
6 M9080B LTE FDD Measurement
Application (optional) www.keysight.com/find/M9080A
7 M937xA PCIe VNA (Version 1.0 or
newer www.keysight.com/find/M9371A
8 M9195A Digital Stimulus/Response www.keysight.com/find/M9195A
9 M9451A Measurement Accelerator www.keysight.com/find/M9451A
10 M7614B Signal Studio for PA Test
(optional) www.keysight.com/find/M7614B
11 Signadyne SD AWG-H3353 PXIe
AWG.(version 1.56.20 or higher https://www.signadyne.com/en/search/?q=-
h3353
12 Y1299A Start-up Kits www.keysight.com/find/Y1299A
13 Cycle power to ensure the drivers are registered and the software is activated. It
will save time to cycle power afer all drivers are installed, instead of do so after each
individual driver installation.
30 Keysight Y1299A-004 RF PA/FEM Reference Solution Startup Guide