Step 2: Install the PXI Modules
Before installing the PXI Modules
Keysight Y1299A-004 RF PA/FEM Reference Solution Startup Guide
27
M9393A Cable and Module Table (Listed in the recommended installation order)
Part Number
Connection
Cable Description
M9365-20039
M9308A RF Out to M9365A 1st LO In
Cable, semi-rigid, SMA
(male) - SMA (male)
M9365-20040
M9308A 4800 MHz Out to M9365A 2nd
LO In
Cable, semi-rigid, SMA
(male) - SMP (male)
1250-3807
M9214A 100 MHz In, left side of Tee to
M9300A 100 MHz Out, right side to
M9308A 100 MHz In
Adapter, T-type, SMB (male)
- SMB (male) - SMB
(female)
8121-2174
M9300A 100 MHz Out to M9214A 100
MHz In
Cable, coaxial, SMB (female)
- SMB (female) 255 mm
8121-2169
M9365A IF Out to M9214A IF In
Cable, coaxial, SMB (female)
- SMB (female) 165 mm
8121-2723
M9300A 100 MHz Out to M9308A 100
MHz In
Cable, coaxial, SMB (female)
- SMP (female) 150 mm
8121-2554
M9308A 100 MHz Out to M9365A 100
MHz In
Cable, coaxial, SMP (female)
- SMP (female) 150 mm
M9365-20042
M9365A Aux 2 Out to M9365A Aux 2 In
Cable, semi-rigid, SMA
(male) - SMA (male)
installed
M9365-20043
M9365A Aux RF Out to M9365A Aux RF
In
Cable, semi-rigid, SMA
(male) - 2.4 mm (male)
installed
8121-2174
Alternate for 8121-2175
Cable, coaxial, SMB (female)
- SMB (female) 120 mm
8121-2554
Alternate for 8121-2495
Cable, coaxial, SMB (female)
- SMP (female) 240 mm
8121-2053
This cable can be used to direct an
external reference into the M9300A Ref
In connector.
Cable, coaxial, BNC (male) -
SMB (female) 1200 mm
1
This component is not shown in the cabling diagram, but is included in the M9393A
shipment.
