manualshive.com logo in svg

Keysight Technologies N5221A, Service Manual, Page: 70 / 368

Share
Download
Keysight Technologies N5221A Service Manual Download Page 70

 3-42                                                                                           Keysight N5221A/22A Service Guide

Tests and Adjustments
Adjustments

3-

Figure 3-14 

Equipment Setup for the 10 MHz Frequency Reference Adjustment

2.

Press UTILITY 

, then 

, then 

, then click 

10 MHz Freq Adjustment.

3.

Ensure the GPIB settings are correct.

4.

Follow the instructions and prompts as they are displayed.

Synthesizer Bandwidth Adjustment

This adjusts the bandwidth of the 13.5 GHz synthesizers.

Procedure

1.

Press UTILITY 

, then 

, then 

, then click 

Synthesizer Bandwidth Adj.

2.

Follow the instructions and prompts as they are displayed.

Source Adjustment

The source calibration is used to adjust your network analyzer for a flat source 

power across its full frequency range. There are differences between each test 

port; therefore, an adjustment is required for each port.

Equipment Used for the Source Adjustment

System

Service

Adjustments

System

Service

Adjustments

Equipment Type

Model or 

Part Number

Alternate Model or 

Part Number

Power meter

E4418B/E4419B

E4418A/E4419A

Power sensor, 3.5 mm

E4413A

8485A

Adapter, 3.5 mm (f) to 3.5 mm (f)

83059B

85052-60012

Summary of Contents for N5221A

















































































































































































































































































































































































Reviews:

No comments