manualshive.com logo in svg

Keysight Technologies N5221A, Service Manual, Page: 154 / 368

Share
Download
Keysight Technologies N5221A Service Manual Download Page 154

 5-30                                                                                           Keysight N5221A/22A Service Guide

Theory of Operation
Digital Processing and Digital Control Group Operation

5-

Main RAM 

The main random access memory (RAM) is shared memory for the CPU and the 

DSP. It stores the raw data received from the DSP while additional calculations 

are performed on it by the CPU. The CPU reads the resulting formatted data 

from the main RAM, converts it to a user-definable display format, and writes 

this to the video processor for display.

Rear Panel Interconnects

The rear panel includes the following interfaces:

A51 Solid State Drive

The solid state drive assembly (SSDA) is an integrated development 

environment (IDE) data storage device which is connected directly to, and 

physically mounted within the enclosure of, the A17 CPU board. The full 

operating system and firmware for the network analyzer is stored on the A51 

solid state drive.

USB x4

Four universal serial bus (USB) jacks (industry standard 4-pin connectors).

 GPIB (0)

 

Controller

A 24-pin, female, type D-24 connector that meets IEEE-488 standards.

 GPIB (1)

 

Talker/Listener

A 24-pin, female, type D-24 connector that meets IEEE-488 standards.

LAN

A standard 8-pin, 10/100BaseT, Ethernet connection. It auto selects between the two data 

rates.

Display (VGA)

A 15-pin, female, D-sub connector that provides a video output of the analyzer display that can 

be viewed on an external VGA monitor.

Summary of Contents for N5221A

















































































































































































































































































































































































Reviews:

No comments