manualshive.com logo in svg

Keysight Technologies N5221A, Service Manual, Page: 166 / 368

Share
Download
Keysight Technologies N5221A Service Manual Download Page 166

 6-10                                                                                           Keysight N5221A/22A Service Guide

Replaceable Parts
Replaceable Parts Listings

6-

Front Panel Assembly, Front Side, All Options

The N5245-60024 (Was N5247-60004) 2-port front panel assembly and 

the N5245-60022 (Was N5247-60005) 4-port front panel assembly 

contain the items shown in the following table.

Reference

 

Designator

Part Number

Qty

Description

➀

N5247-20137

 

1

Front frame, 2-port (frame only, not the assembly)

N5247-20141

Front frame, 4-port (frame only, not the assembly)

8160-0660

1.2 m

RFI gasket material, 1.2 meters in length

 

(Must be ordered separately from front frame.)

0515-2044

20

Machine screw (x12), M4.0 x 12 flat head (To attach front frame to chassis.)
Machine screw (x8), M4.0 x 12 flat head (To attach front handles to front 

panel.) Note: Front handle screws not shown.

a

a. Refer to 

“Rack Mount Kits and Handle Kits” on page 6-106

 for part numbers of complete rack mount kits.

5041-9176

2

Trim strip, filler (For analyzers without handles.)

N5242-80005

1

Keypad overlay

N5222-80002

1

Lower front panel overlay, 2-port (Option 200)

N5222-80003

Lower front panel overlay, 2-port (Option 201)

N5227-80002

Lower front panel overlay, 2-port (Option 210)

N5222-80004

Lower front panel overlay, 2-port (Option 217)

N5222-80003

Lower front panel overlay, 2-port (Option 219)

N5222-80005

Lower front panel overlay, 4-port (Option 400)

N5222-80006

Lower front panel overlay, 4-port (Option 401)

N5227-80003

Lower front panel overlay, 4-port (Option 410)

N5222-80007

Lower front panel overlay, 4-port (Option 417)

N5222-80006

Lower front panel overlay, 4-port (Option 419)

N5242-80007

1

Power switch overlay

W1312-40017

1

Front panel (RPG) knob

N5221-80005

1

Nameplate, N5221A

N5222-80001

Nameplate, N5222A

0515-1946

4

Machine screw, M3.0 x 6, 90-deg flat head (To attach subpanel to front 

frame.) (Only 2 used on 2-port, all 4 used on 4-port.)

2

3

4

5

6

7

8

9

Summary of Contents for N5221A

















































































































































































































































































































































































Reviews:

No comments