Keysight Technologies N1911A Service Manual Download Page 3

Page: 3 / 121

Keysight N1911A/1912A Service Guide

Certification

Keysight Technologies certifies that this product met its published specifications

at the time of shipment from the factory. Keysight Technologies further certifies

that its calibration measurements are traceable to the United States National

Institute of Standard and Technology, to the extent allowed by the Institute’s

calibration facility, and to the calibration facilities of other International Standard

Organization members

Limitation of Warranty

The foregoing warranty shall not apply to defects resulting from improper or

inadequate maintenance by Buyer, Buyer-supplied software or interfacing,

unauthorized modification or misuse, operation outside of the environmental

specifications for the product, or improper site preparation or maintenance. NO

OTHER WARRANTY IS EXPRESSED OR IMPLIED. KEYSIGHT TECHNOLOGIES

SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE.

Exclusive Remedies

THE REMEDIES PROVIDED HEREIN ARE BUYER’S SOLE AND EXCLUSIVE

REMEDIES. KEYSIGHT SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON

CONTRACT, TORT, OR ANY OTHER LEGAL THEORY.

Summary of Contents for N1911A


























































































































Search results

Summary of Contents for N1911A

Reviews:

Related manuals for N1911A

Brands by name

Popular brands

Keysight Technologies N1911A, Service Manual

Search results

Summary of Contents for N1911A

Reviews:

Related manuals for N1911A

Brands by name

Popular brands