26
N108xA-Series Getting Started
2
Installing Both N108xA and N1010A FlexDCA on a PC
Step 10. Connect to the ENA Network Analyzer
1
In the compliance application’s
Set Up
tab, select
ENA
for the network analyzer and then click
Connect PNA/ENA
.
Figure 18
Selecting an ENA Network Analyzer
2
Go to the Keysight Connection Expert, right click on the ENA listing, and copy the SICL address that
is shown in
Figure 19
Copy ENA’s SICL Address
3
Return to the compliance application.
NOTE
If you are using a PNA instead of an ENA network analyzer, skip these steps and continue with
