36
N108xA-Series Getting Started
3
Installing N108xA on a PC Without N1010A FlexDCA
5
In the Keysight License Manager, select and right click the compliance application listing and click
Install
. If the compliance application is not listed, click
File
>
Install
.
6
In the
Install License File(s)
dialog box, locate your license file and click
Open
. You may have up four
licenses: N1081A, N1082A, N1083A, and N1084A as shown in
Figure 31
Compliance Application Licenses in Keysight License Manager
7
Select and install the 86100DU-401 license on the 86100D.
8
Close the Keysight License Manager.
NOTE
If you are using one of the switching test sets (switch matrix), you will also need one of the N1081A-7FP,
N1082A-7FP, N1083A-7FP, or N1084A-7FP licenses.
NOTE
If you plan to run all of the application’s IEEE 802.3 Ethernet KR/CR tests, you will need install one each of the
N1081A, N1082A, N1083A, and N1084A licenses.
