Installing N108xA on a PC Without N1010A FlexDCA
3
N108xA-Series Getting Started
49
Step 12. Connect to the ENA Network Analyzer
1
In the compliance application’s
Set Up
tab, select
ENA
for the network analyzer and then click
Connect PNA/ENA
.
Figure 45
Selecting an ENA Network Analyzer
2
Go to the Keysight Connection Expert, click on the ENA listing, and copy (
CTRL-C
) the SICL address
Figure 46
Copy ENA’s SICL Address
3
Return to the compliance application.
4
Select
Enter full SICL address
and paste (
CTRL-V
) the SICL address into the field as shown in
5
Click
Identify
to confirm the connection.
NOTE
If you are using a PNA instead of an ENA network analyzer, skip these steps and continue with
