Keysight Technologies N108 A Series, Getting Started

Page: 17 / 78

Installing Both N108xA and N1010A FlexDCA on a PC
2
N108xA-Series Getting Started 17
Step 5. Add ENA Network Analyzer to Keysight Connection
Expert
An ENA or PNA network analyzer is required to perform the return-loss measurements.
1
Locate the ENA instrument’s Hostname (Full Computer Name) and record it on the following line.
Refer to the network analyzer‘s documentation for locating this information.
Hostname: __________________________
2
On the PC’s Windows Start menu, click Keysight IO Libraries Suite > Keysight Connection Expert and wait
for the Keysight Connection Expert to open.
Figure 9 Starting Connection Expert in Windows Start Menu
3
In Keysight Connection Expert, click the LAN I/O interface identified in Figure 10 . Then, click Add
Instrument .
NOTE
If you are using a PNA instead of an ENA network analyzer, skip these steps and continue with “Step 6. Add PNA
Network Analyzer to Keysight Connection Expert" on page 20.
NOTE
A connection is established to an ENA using the LAN protocol.