52
N108xA-Series Getting Started
3
Installing N108xA on a PC Without N1010A FlexDCA
Figure 49
SICL Address Pasted into Dialog Box
Step 14. Connect to the N4877A
1
In the compliance application’s
Set Up
tab, click the
Connect N4877A
button that is located at the
bottom of the window.
2
Enter the full SICL address or VISA alias. Or, select
Select from
Keysight
Connection Expert
as shown in
3
Click
Identify
to confirm the connection.
Figure 50
N4877A Selected from Connection Expert
4
Click
OK
to close the dialog box.
NOTE
Skip this step if your test setup uses an 86108A/B module. The N4877A Clock Data Recovery & Demultiplexer is
used whenever two 86100D modules are used in the test setup rather than an 86108A/B module. Refer to
