48
N108xA-Series Getting Started
3
Installing N108xA on a PC Without N1010A FlexDCA
Step 11. Start the Compliance Application
1
Minimize the Keysight Connection Expert if it is open.
2
On the PC’s start menu, click
Launch User Defined Application 'N108xA IEEE802.3 Test App’
.
3
The Connect to Scope dialog box will open as shown in
4
Select
Select from
Keysight
Connection Expert
as shown in the figure.
5
Select
Identify/Remove inactive instruments
.
6
Click the 86100D’s listing (with the host name in the SICL Address field) and then click
OK
to close
the dialog box.
Figure 44
Connect to Scope Dialog Box
7
If a dialog box appears, click
OK
to close it.