20
N108xA-Series Getting Started
2
Installing Both N108xA and N1010A FlexDCA on a PC
Step 6. Add PNA Network Analyzer to Keysight Connection
Expert
1
If you already connected an ENA network analyzer, skip these steps and continue with
N4877A to Keysight Connection Expert"
2
Locate the PNA instrument’s IP address and record it on the following line. Refer to the network
analyzer‘s documentation for locating this information.
IP Address: ___________________________________
3
On the PC’s Windows Start menu, click Keysight
IO Libraries Suite
>
Keysight Connection Expert
and wait
for the Keysight Connection Expert to open.
4
In Keysight Connection Expert, click the
LAN
I/O interface identified in
. Then, click
Add
Instrument
.
NOTE
A connection is established to a PNA using the sockets protocol.
