28
N108xA-Series Getting Started
2
Installing Both N108xA and N1010A FlexDCA on a PC
Step 11. Connect to the PNA Network Analyzer
1
In the compliance application’s
Set Up
tab, select
PNA
for the network analyzer and then click
Connect PNA/ENA
.
Figure 21
Selecting an PNA Network Analyzer
2
Go to the Keysight Connection Expert, right click on the PNA listing, and copy the SICL address that
is shown in
Figure 22
Copy PNA’s SICL Address
NOTE
If you are using an ENA instead of an PNA network analyzer, skip these steps and continue with
NOTE
Notice that this LAN address for the PNA has the form lan,5025[
IP address
].
