manualshive.com logo in svg

Keysight Technologies M9195A PXIe, Startup Manual

Share
Download
Keysight Technologies M9195A PXIe Startup Manual Download Page 5

Keysight M9195A/B PXIe Digital Stimulus/Response Module Startup Guide

v

Contents

Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1

M9195A versus M9195B  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
Common M9195A/B Functionality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
Functional Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2

Follow the Startup Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Related Documentation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4

Manuals and Help Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4

Step 1: Unpack and Inspect the Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

ESD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
Inspect for damage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
Returning a module for service  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7

Step 2: Verify M9195A/B Shipment Contents  . . . . . . . . . . . . . . . . . . . . . . . . . .  8

M9195A Shipments  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
M9195A Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
M9195B Shipments  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
M9195B Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
M9195A/B Accessories  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9

Step 3: Install the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10

Power up the controller  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
Software installation overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
Software installation procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11
Where to Find the Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11

Step 4: Install the Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13

Chassis requirements for temperature control  . . . . . . . . . . . . . . . . . . . . . .  13
Module installation procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14

Step 5: Verify Operation of the M9195A/B Module . . . . . . . . . . . . . . . . . . . . .  16

Check the Status LED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16
Check for M9195A/B with Connection Expert. . . . . . . . . . . . . . . . . . . . . . .  16
Bring Up Soft Front Panel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18
Conduct a Self Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  20

Step 6: Execute Automatic Corrections  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  22

Automatic Corrections procedure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23

Step 7: Check M9195B Licensing (Optional)  . . . . . . . . . . . . . . . . . . . . . . . . . .  26

Upgrade Options  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26
Checking Hardware Upgrade Option Licensing. . . . . . . . . . . . . . . . . . . . . .  27

High-Level Diagnostic Tools, Processes and References . . . . . . . . . . . . . . . . .  28

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  28
Fault Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  28
Troubleshooting Check List  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  28
Status LED Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  30

Summary of Contents for M9195A PXIe















































Reviews:

No comments

Brands by name

Popular brands

Load more brands