Keysight Technologies M9195A PXIe, Startup Manual

Page: 16 / 46

10 Keysight M9195A/B PXIe Digital Stimulus/Response Startup Guide
Step 3: Install the Software
Step 3: Install the Software
Power up the controller
For external controllers:
For embedded controllers:
If you are using an embedded controller, complete the following steps:
1
Install the embedded controller module into a compatible PXIe chassis. The
Keysight M9037A PXIe Embedded Controller and Keysight M9018A PXI
Chassis are recommended. Please refer to your embedded controller and
chassis documentation for further details.
2
Connect peripherals (mouse, keyboard, monitor).
3
Power up the chassis.
Software installation overview
This installation requires the following:
- Keysight IO Libraries Suite (IOLS), which includes the Keysight Connection
Expert. This software is included with your shipment (CD part number
E2094-60003), and is also available at www.keysight.com/find/iosuite .
- M9195A/B instrument software, which includes the Soft Front Panel (SFP),
device drivers (IVI-C and IVI-COM), and documentation for the M9195A/B
PXIe Digital Stimulus/Response module. This software is available on the
Software and Product Information CD and at
www.keysight.com/find/M9195B .
If you are using a external controller such as a PC and you have
installed the PCIe interface cable to the chassis, you must power
up the chassis BEFORE you power up the PC. When you power
down your chassis, Shut Down the PC BEFORE you power down
the chassis.
The IO Libraries Suite must be installed prior to installing the
M9195A/B driver.