6
Keysight M9195A/B PXIe Digital Stimulus/Response Startup Guide
Step 1: Unpack and Inspect the Module
Step 1: Unpack and Inspect the Module
ESD
Electrostatic discharge (ESD) can damage or destroy electronic components. All
work on electronic assemblies should be performed at a static-safe work station.
The following figure shows an example of a static-safe work station using two
types of ESD protection. Purchase acceptable ESD accessories from your local
supplier.
-
Conductive table-mat and wrist-strap combination.
-
Conductive floor-mat and heel-strap combination.
Both types, when used together, provide a significant level of ESD protection. Of
the two, only the table-mat and wrist-strap combination provides adequate ESD
protection when used alone. To ensure user safety, the static-safe accessories
must provide at least 1 M
of isolation from ground.
Inspect for damage
After unpacking a module, inspect it for any shipping damage. Report any
damage to the shipping agent immediately, as such damage is not covered by
the warranty (see warranty information at beginning of this document).
The module is shipped in materials which prevent damage from
static electric discharge. The module should only be removed
from the packaging in an anti-static area ensuring that correct
anti-static precautions are taken. Store all modules in anti-static
envelopes when not in use.
To avoid damage when handling a module, do not touch exposed
connector pins.
Summary of Contents for M9195A PXIe
Page 45: ......
