38
Keysight M9195A/B PXIe Digital Stimulus/Response Startup Guide
Accessories
Accessories
Refer to the accessory documents on the
Software and Product Information CD
.
Accessories available for the M9195A/B modules include:
–
Y1245A, Y1246A, Y1247A work with both A and B models
These are all the same cable at lengths of 0.5, 1 and 2 meters. These
cables connect the Digital IO Connectors on the front panel (see
“M9195A/B Front Panel Features”
on page 37) with DUTs or other
hardware.
–
Y1248A, Y1249A work with both A and B models
These cables allow one M91995A/B module to connect the Digital IO
Connector to multiple DUTs or other hardware. The Y1248A is 1 meter in
length, while the Y1249A is 2 meters.
–
Y1250, Y1251 work with only the B model
These cables connect the Multi-Module Sync connector on a
Primary
M9195B
to other M9195B modules. The Y1250 connects the
primary
with up
to
3
s
econdary
modules, while the Y1251 connect
s
up to 1
1
s
econdary
modules
.
–
Y1252A works with both A and B models
This cable assembly supports M9195A/B calibration.
–
Y1253A works with both A and B models
This is a prototyping board that may be connect to the Digital IO and
PPMU connector on the M9195A/B front panels. It supports development
of test fixtures for interfacing to DUTs.
–
Y1254A, Y1255A work with both A and B models
These cables connect the Digital IO and PPMU connectors with external
hardware using coax to SMA connectors for IO channels and ribbon
cables to header receptacles for PPMU sense and open drain lines. The
Y1254 and Y1255 come in 1 and 2 meter lengths respectively and
support development and troubleshooting of test setups.
An additional cable is shipped as part of the Multi-Module Sync option
(M9195B-MMS). It uses SMB coax connectors to
daisy-chain signals from the
Primary
M9195B module to multiple
Secondary
M9195B modules. For details, see the Accessory documen-
tation on the M9195A/B
Software and Product Information CD
.
Summary of Contents for M9195A PXIe
Page 45: ......
