manualshive.com logo in svg

Keysight Technologies FieldFox A Series, User Manual

Get the most out of your Keysight Technologies FieldFox A Series with the comprehensive User Manual. Easily download the manual for free from our website to maximize your device's performance and functionality. Whether you're a new user or a seasoned pro, this essential guide has you covered.

Share
Download
background image

Keysight N9927-90001 User’s Guide                                                                                                             7

Contents

1. Overview

Models and Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

FieldFox Manuals, Software, and Supplemental Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Conventions that are used in the Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Safety Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

2. Preparing for Initial Use of Your New FieldFox

Check the Shipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Meeting Power Requirements for the AC/DC Adapter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Install the Lithium-Ion Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Battery Usage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

FieldFox ON/OFF Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Power Button LED Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

FieldFox High Temperature Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

How to monitor the internal FieldFox temperature:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Temperature Control Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
High-Temp Shutdown Warning (RTSA Mode Only)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Avoid Overpowering the FieldFox. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Take the FieldFox Tour  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Top Panel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Right Side Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Left Side Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Screen Tour. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

How to Enter Numeric Values  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Multiplier Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Connector Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

3. CAT (Cable and Antenna Test) Mode

CAT Mode Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

How to select CAT Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Measurement Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Quick Settings Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Scale Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Averaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Summary of Contents for FieldFox A Series





















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for FieldFox A Series

Yamaha Mark III User Manual preview
Mark III
Brand: Yamaha Pages: 83
Yamaha Mark III Operating Manual preview
Mark III
Brand: Yamaha Pages: 63
Bante Instruments PHscan10 User Manual preview
PHscan10
Brand: Bante Instruments Pages: 6
DAKOTA ULTRASONICS ZX-5 Instruction Manual preview
ZX-5
Brand: DAKOTA ULTRASONICS Pages: 50
Jamar Radar Recorder Quick Start Manual preview
Radar Recorder
Brand: Jamar Pages: 4
Jenoptik LDM51 Series Operating Manual preview
LDM51 Series
Brand: Jenoptik Pages: 54
Keysight M3100A PXIe User Manual preview
M3100A PXIe
Brand: Keysight Pages: 92
Floyd Rose SPEEDLOADER BRIDGE SYSTEM Manual preview
SPEEDLOADER BRIDGE SYSTEM
Brand: Floyd Rose Pages: 10
Baker Hughes Panametrics Aurora H2O User Manual preview
Panametrics Aurora H2O
Brand: Baker Hughes Pages: 92
phase II UTG-2650 Manual preview
UTG-2650
Brand: phase II Pages: 11
Kawai CN25 Operation Manual preview
CN25
Brand: Kawai Pages: 2
OTOVATION Amplitude T Series Installation Manual preview
Amplitude T Series
Brand: OTOVATION Pages: 15
Righton Retinomax K+Screeen Instructions Manual preview
Retinomax K+Screeen
Brand: Righton Pages: 112
PHYWE 13621.00 Operating Instructions Manual preview
13621.00
Brand: PHYWE Pages: 6
PKP DTL06 Instruction Manual preview
DTL06
Brand: PKP Pages: 7
TESTO 0560 3164 Quick Start Manual preview
0560 3164
Brand: TESTO Pages: 2
OrienTek TPM-25m Quick Start Manual preview
TPM-25m
Brand: OrienTek Pages: 2
Keithley 6482 Reference Manual preview
6482
Brand: Keithley Pages: 350

Brands by name

Popular brands

Load more brands